PoolPump 1.5HP Swimming Pool Pump In/Above Ground withMotor Strainer Filter Basket
PoolPump 1.5HP Swimming Pool Pump In/Above Ground w/Motor Strainer Filter Basket. Locate the pump as close as possible to the pool. The pump suction line should not be smaller than the pressure line. All piping must be airtight.
The threads on the pump must be sealed with Teflon Tape or Silicon, when the pump unions are screwed on. The weight of the piping should be supported independently and not carried by the pump. Fill the pump tank with water before starting.
High suction lifts, or long suction lines, require additional time and reduce the performance of the pump. The water being pumped cools and lubricates the seal. After the pump tank has been filed with water, and the motot started, aow a few moments for the pump to start delivering water.
1 The Pump Pressure is low, The Pump loses Pressure after being energized; Pump is running, But no water coming out. The pump head is not filled with water, causing the pump to run without water.
During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water.
Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage.
1 The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2 The pump prevents the inlet from entering the water and burns the motor.
3 There is Water in The Pump. Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal.
4 The Pump stop working suddenly. Our company's products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process, generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise, pump stop working. Clean up the waste inside the flter screen of the water pump regulany to prevent the waste foreign mater from fowing into the water pump to jamthe impeller. Disassemble the pump body, clean up the foreign mater on the back of the pump body to ensure that there is no foreign maler biocking theimpeller, and re-assembly can be reused. The foreign matter of the pump impeler and the difuser is matched wth the foreign mater, causing the impeller to be stuck and cleaning the foreign matter. Temp : 131 Degree Fahrenheit (55 Degree Celsius). Brand new for inground and aboveground. High performance, energy saving motor with stainless steel shaft could stand wear and tear. Thermally protected motor for greater protection and longevity. Extra-large debris basket keeps pool maintenance to a minimum, letting you enjoy your pool more, while the clear cover lets you see exactly when the basket needs cleaning. Easy start up fill pump with water upon first use to prevent motor from overheating. Transparent cover helps to judge if the basket needs clean or not. Massive strainer basket holds extra capacity. Suggested Installation: 24"-26" sand filter and above-ground pools. 304 grade stainless steel motor shaft, Powerful Pool Pump heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation. Strainer basket to minimize how often you have to empty it. See-through strainer cover for a fast and easy check of the strainer. Easy-thread strainer housing ring makes cover removal extremely easy.Dependability with carborundum and graphite mechanical seals and components molded of corrosion-proof, reinforced thermoplastic. Convenient drain plug makes winter maintenance easy.
High Efficiency Impeller maximize flow and reduce noise while the energy efficient motor with commercial-grade frame; Internal Inlet Fitting: 1.5" NPT (fit for 1.5" male threaded adapter). Item located in California and New Jersey of Unites States of America, there are 2 warehouses.
Except holiday, weekend, weather delay etc. Package sent from which above warehouse according to inventory stock quantity, and post address distance. Hope you understand and be patient.
Usually, request would be agree in 24 hours. If you have not received our reply in time, It may be our service officer is rest. All item passed FCC / CE / ROHS certificates. We work with good supplier who supply good quality materials and products and we have 2 factories producing most of our products, we are confidence to provide very good quality products with competitive price.
We don't cover the failure or damage caused by misuse, accident, modification, inappropriate physical or operating environment, natural disaster, power surge, and improper maintenance or storage.