2.0HP Swimming Spa Pool Pump Motor Strainer Inground Above Ground For Hayward

2.0HP Swimming Spa Pool Pump Motor Strainer Inground Above Ground For Hayward. This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean.

Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools.

Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly.

Thank you for your cooperation. 1, The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. Causes: The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head.

During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Before pumping, the pump head should be filled with water. Inlet and outlet joints wrapped around the raw material tape, beware of leaks.

Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage 2, Pump motor trip Causes: 1, The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. 2, The pump prevents the inlet from entering the water and burns the motor 3, There is Water in The Pump Causes: Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal.

4, The Pump stop working suddenly. Causes: Our company's products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working.

Solution: Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter.

A:To keep our customer satisfied. We process all of our orders on a timely manner.

Please be careful when placing an order. Q:How do I track my package? Our warehouse is located in. How long shall I wait for my package?

It is up to the convience for Post office. Our warehouese is located in Dayton , NJ. The makeup palette , brushes µ needles&lip or personal use Products, Etc that once used do not accept any return. Please read the item description and see if the item fits your vehicle exactly. Saturday, Sunday, and Holiday : Closed.

Is very very important for us to do business online. Finnaly, We hope you have a happy shopping here! 2.5HP In-Ground Swimming Pool Pump Motor Strainer Replacement For Hayward. Hayward 2.5HP Swimming Pool Pump Self-Priming Spa Above In Ground 1850w Motor.

1.5HP Swimming Pool Electric Pump Motor SPA DC 2 NPT Water Above Ground. 1.5HP Swimming Pool Pump Motor Hayward w/Strainer Generic In/Above Ground. Electric Filter Pump Swimming Pool for Above Ground Pools Water Circulate Tool. Electric Swimming Pool Filter Pump Powerful Water Cleaning System Above 300GAL. The item "2.0HP Swimming Spa Pool Pump Motor Strainer Inground Above Ground For Hayward" is in sale since Wednesday, August 18, 2021. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps".

The seller is "supersky001" and is located in Dayton, New Jersey. This item can be shipped to United States.

Amperage: 12.3/6.1A
Brand: Unbranded
Certification: UL Certification
Color: Black
Energy Star: A+++
Features: Easy Assembly
Frequency: 60HZ
Hmax: 17Meter
Horsepower: 2.0HP
Installation: Universal Installation
Item Dimensions LxWxH: 22.4 x 9.8 x 11.4 inches
Item Height: 11.4"
Item Length: 22.4"
Item Weight: 26lbs
Item Width: 9.6"
Labels & Certifications: CE-Approved
Manufacturer Warranty: Lifetime
Material: ABS
Max. Temp: 122 Degree Fahrenheit (50 Degree Celsius)
Maximum Flow Rate: 113 Gallons Per Minute
Maximum Head Lift: 17 Meter
Model: 2.0HP
Motor Shaft Material: Stainless Steel
Pool Type: In Ground &Above Ground
Power: 1500 W
Power Cord: 59"
Power Source: Corded
Pump Housing Material: PPGF30 + PC (anti-Oxident)
Qmax: 430 L/min
Rated Power: 1500W/2HP
Recommended Flow Rate: 1500 GPH
RPM: 3450/min
Set Includes: Full Instructions
Speed: Single-Speed
Suitable For: Above Ground Pools
Type: Pool Pump
Voltage: 110-120V/220V-240V
Water Type: All Water Types