Hayward 2.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US. Maintain a crystal clear and sparkling pool or spa that everybody loves with the new SPPE series self-priming 1850W electric swimming pool pump. Locate the pump as close as possible to the pool.
The pump suction line should not be smaller than the pressure line. All piping must be airtight 3. The threads on the pump must be sealed with Teflon Tape or Silicon, when the pump unions are screwed on. The weight of the piping should be supported independently and not carried by the pump. Fill the pump tank with water before starting.High suction lifts, or long suction lines, require additional time and reduce the performance of the pump. The water being pumped cools and lubricates the seal. After the pump tank has been filled with water, and the motot started, allow a few moments for the pump to start delivering water. The installation must be according to the normal power indicated on the label. The amperage must not at any time exceed the value indicated on the label It is recommended that you consult a state-registered electrician.
Place the pump in a dry area with good ventilation. The ambient temperature must not exceed 40 The pumps are only suitable for counter-clockwise rotation when viewing from the pump end. Three phase motors can rotate in either direction.
Interchanging any of the cables on a three-phase motor will reverse the rotation. Momentarily start, or bump the motor without water in the tank, to check the rotation of the pump shaft. Before disconnecting electrical connections, shut off electricity at its source.Newer work on pump without making certain the power is OFF. This appliance is not intended for use by persons, including children with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible for their safety Children should be supervised to ensure that they do not play with the appliance.
Head : Max 19m / 62.34ft. Pipe Compatibility : Fit 1.5 inch plumbing internally. Weight : 10.2 kg / 22.5 lbs. 1 x SPPE250 Swimming Pool Pump.1 x User's Manual. A:To keep our customer satisfied.
We process all of our orders on a timely manner. Please be careful when placing an order. Q:How do I track my package? Our warehouse is located in. How long shall I wait for my package?It is up to the convience for Post office. Our warehouese is located in Dayton , NJ. The makeup palette , brushes µ needles&lip or personal use Products, Etc that once used do not accept any return. Please read the item description and see if the item fits your vehicle exactly.
Saturday, Sunday, and Holiday : Closed. Is very very important for us to do business online.
Finnaly, We hope you have a happy shopping here! 2.0/2.5HP In/Above Ground Swimming Pool Pump Motor Hayward w/ Strainer 115-230V.2HP 110-240V 6500GPH In/Above ground Swimming POOL PUMP MOTOR w/Strainer Hayward. InGround Swimming Pool Pump Motor Strainer Generic For Hayward Replacement 1.5HP. 1.5HP 2 Swimming Pool Pump Motor Hayward w/Strainer Generic In/Above Ground UL. Electric Swimming Pool Filter Pump For Above Ground Pools Cleaning Tool 300 GAL. 220V Electric Filter Pump Above Ground Swimming Pool Water Cleaner 300GAL.
The item "Hayward 2.5HP In/Above Ground Swimming Pool Pump Motor Strainer Generic US" is in sale since Thursday, July 22, 2021. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps".
The seller is "ebec16" and is located in Dayton, New Jersey. This item can be shipped to United States.