He Updated SPPE Series Swimming Pool Pump - the leader in pump. Maintain a crystal clear and sparkling pool or spa that everybody loves with the New SPPE Series Self-Priming 1850W Electric Swimming Pool Pump. Super-efficient IP55 1850W 2.5HP Electric Motor.Truly the industry's most energy efficient filtration pump. The New SPPE Series 1850W Electric Swimming Pool Pump takes care of cleaning, filtration and chlorine/salt distribution. Revolutionised removable strainer basket with a built-in thermal overload protection - as the water circulates and passes through the filter, it leaves your pool squeaky clean, free from leaves, hair strands, debris and other impurities. The Ultra series is designed to work in harmony with both your filtering unit and pool cleaner and will power along throughout the day. The fine filter basket ensures debris does not enter the pump, ensuring trouble free operation and extended life of filter sand. This latest New SPPE series feature a thermoplastic filter cartridge and tank body, engineered to stand-up to pool salt, chlorine and a host of other regular pool chemicals. As is the case with all New SPPE pumps, the Ultra series is constructed with longevity in mind and employs extensive use of corrosion proof materials resistant to the elements along with all chemicals commonly associated with pool maintenance. The SPPE250 can refresh up to a 100,000 Litre pool in less than 3 hours.
Making it ideal for most Aussie backyards. Meaning if the capacity of your pool or spa is <100,000 Litres (average pool size) the Ultra series is ideal. Designed for permanent installation, the Ultra series offers the very best in Set-n-Forget pool maintenance. Whether you're updating an existing unit or completing a new installation, choose SPPE Series pumps for year round peace of mind. Locate the pump as close as possible to the pool.
The pump suction line should not be smaller than the pressure line. All piping must be airtight. The threads on the pump must be sealed with Teflon Tape or Silicon, when the pump unions are screwed on.
The weight of the piping should be supported independently and not carried by the pump. Fill the pump tank with water before starting. High suction lifts, or long suction lines, require additional time and reduce the performance of the pump. The water being pumped cools and lubricates the seal. After the pump tank has been filled with water, and the motot started, allow a few moments for the pump to start delivering water.Powerful Self-Priming IP55 2.5HP Electric Motor. Suitable for pools up to 100,000 litres. Advanced S-Tek Flow System For Increased Efficiency With.
Continuous Flow Rate Of 560L/min. Full Size Removable Strainer Basket.
100% Salt and Chlorine compatible. Full Commercial Duty - Designed to run 24/7.Works with In ground and Above Ground. Ideal for Residential/Commercial Swimming Pools & Spa's. Head:Max 19m / 62.34ft. Inlet:1.57'' (40mm) Internal / 2'' (50mm) External. Outlet:1.57'' (40mm) Internal /2'' (50mm) External. Pipe Compatibility:Fit 40mm(1.57 inch) plumbing internally and 50mm(2 inch) plumbing externally. Package Size:600 x 205 x 350mm / 24'' x 8.07'' x 14'' (L x W x H). Weight: 10.2 kg / 22.5 lbs. 1 x Swimming pool pump SPPE250. 1 x User's Manual.
Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation.
Problem Description:The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out. The pump head is not filled with water, causing the pump to run without water. During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head.During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water. Solution: When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes. Inlet and outlet joints wrapped around the raw material tape, beware of leaks. Tightening when installing the inlet and outlet, beware of leaks. The pump head transparent cover is tightened to prevent air leakage and water seepage. Problem Description: Pump motor trip. The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn. The pump prevents the inlet from entering the water and burns the motor. Problem Description:There is Water in The Pump. Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal. Problem Description: The Pump stop working suddenly. Our company's products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working. Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described.
Used items will not be accepted for return. We will reply you ASAP. Our aim is to provide Top Level Customer Service, so we will try our best to solve any problem. The item "2.5HP 110V 1850W IN Ground Swimming Pool SPA Pump MOTOR Strainer Inground" is in sale since Tuesday, April 9, 2019.This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps". The seller is "snddh19892015" and is located in Monroe Township, New Jersey. This item can be shipped to United States.